Rmax
High R-Value Wall and Roof Insulation Board
13524 Welch Road
Dallas, Texas 75244-5291
Toll Free: 800-527-0890
Phone: 972-387-4500
Fax: 972-387-4673
Email: rmax@rmaxinc.com
Web: www.rmaxinc.com

Rmax Thermasheath-3 Rigid Thermal Wall Insulation Board for Cavity Walls and Block Wall Construction

The Popular Choice in Energy-Efficient Wall Insulation
Rmax's Thermasheath-3 Thermal Insulation Board is suitable for use in walls, and some limited roofing applications in new commercial, residential, agricultural and industrial buildings and in thermal retrofit construction within existing buildings.

Call 1-800-527-0890 or email rmax@rmaxinc.com for samples.

Product Description
Thermasheath-3 Thermal Insulation Board is a rigid foam plastic thermal insulation board composed of environmentally sound, closed cell, polyisocyanurate foam bonded to reinforced aluminum foil facers on each side. Thermasheath-3 Thermal Insulation Board utilizes a new, HCFC free, blowing agent.

Applications – New and Retrofit
Thermasheath-3 Thermal Insulation Board is applied to the exterior or interior face of wood or metal studs to cover all studs, sills, plates and header constructions, thereby providing insulation over areas not normally covered by insulation products. You can apply Thermasheath-3 Thermal Insulation Board to either the exterior face or interior face of concrete or concrete masonry walls to provide an insulation layer over the entire surface. When used on the inside face of walls, Thermasheath-3 must be covered by an approved thermal barrier. Thermasheath-3 Thermal Insulation Board is Energy Star^® qualified. Refer to specs sheet for specifications on securing Thermasheath-3 Thermal Insulation Board.

Compliances
Product Specification – ASTM C1289, Type I.
Thermasheath-3 Thermal Insulation Board conforms to the International Building Code (International Code Council) Chapter 26 Section 2603 Foam Plastic.

Standard Sizes and Packaging
Width: 48"
Length: 96" and 108"