Rmax
High R-Value Wall and Roof Insulation Board
13524 Welch Road
Dallas, Texas 75244-5291
Toll Free: 800-527-0890
Phone: 972-387-4500
Fax: 972-387-4673
Email: rmax@rmaxinc.com
Web: www.rmaxinc.com

Rmax R-Matte^® Plus-3 Rigid Thermal Wall Insulation for Frame and Masonry Construction

All-Around Versatile Wall Insulation Board
Rmax's R-Matte Plus-3 Thermal Insulation Board is suitable for use in wall sheathing applications in new residential, commercial and agricultural buildings and for thermal retrofit construction to existing buildings. R-Matte Plus-3 thermal insulation board is ideal for use in both frame and masonry construction.

Call 1-800-527-0890 or email rmax@rmaxinc.com for samples.

Product Description
R-Matte Plus-3 thermal insulation board is a rigid foam plastic thermal insulation board composed of environmentally sound, closed cell, polyisocyanurate foam bonded to a durable white-matte non-glare aluminum facer and a reflective reinforced aluminum facer. R-Matte Plus-3 thermal insulation board utilizes an HCFC-free blowing agent.

Applications – New and Retrofit
R-Matte Plus-3 thermal insulation board is applied to the exterior or interior face of wood or metal studs to cover all studs, sills, plates and header constructions, thereby providing insulation over areas not normally covered by insulation products. You can apply R-Matte Plus-3 to either the exterior or interior face of concrete or concrete masonry walls to provide an insulation layer over the entire surface.

R-Matte Plus-3 thermal insulation board is designed to be covered with siding materials of wood, wood-based products, cement based sidings, aluminum, vinyl, brick, or stucco veneers. The white-matte (non-glare) side of this sheathing panel is installed facing to the outside of the wall structure when the exterior siding will be wood, wood-based products, cement based sidings, aluminum or vinyl sidings. The reflective aluminum side of the sheathing panel is installed to the outside of the wall structure when the exterior finish will be either brick or stucco. R-Matte Plus-3 can also be installed on the inside surface of walls when properly covered by an approved thermal barrier. R-Matte Plus-3 is Energy Star^® qualified. Refer to specs sheet for specifications on securing R-Matte Plus-3 Thermal Insulation Board.

Compliances
Product Specification – ASTM C1289, Type I.
R-Matte Plus-3 thermal insulation board is accepted as a nonstructural insulative sheathing board by the following major model building codes:  National Building Code (BOCA), Section 2603; Standard Building Code (SBCCI), Section 2603; Uniform Building Code (ICBO), Section 2602.

Standard Sizes and Packaging
Width: 48"
Length: 96" and 108"