GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
Tel: (800) 766-3411
Web site: http://www.gaf.com

Product Data Sheet
EverGuard^®
TPO
Flashing Accessories

The GAF EverGuard^® TPO single-ply roofing system includes an extensive line of EverGuard TPO flashing accessories for use with EverGuard TPO roofing materials. EverGuard flashing accessories are heat welded to the EverGuard roofing and flashing membrane. They are easy to install and provide secure protection from roof edge to parapet to penetration to wall. The following EverGuard TPO flashing accessories are available in standard colors of white, gray and tan.

Product Description Benefit / Application

Preformed Vent Boots

.075" thick molded
membrane • One standard size accommodates most common pipe and conduit, including square tube.
• Heat welds directly to roofing membrane.
• Supplied with stainless steel clamping rings.

Preformed Corners .060" thick molded
membrane • Universal style accommodates both inside and outside corners of base and curb flashing.
• Heat welds directly to roofing membrane.

Prefabricated
Expansion Joint
Covers

.045" thick reinforced
membrane with
foam-supported
bellows

• Two standard sizes to accommodate most common joint widths.
• Standard 50 ft. continuous length minimizes joints.
• Equipped with metal nailing flanges and membrane welding flaps.
• Universal style suitable for both field and wall expansion joint in both flat-mounted and curb-mounted styles.
• Heat welds directly to roofing membrane.
• Factory-fabricated terminations and transitions available.

UN-60 Detailing
Membrane

.060" thick unreinforced
membrane

• Alternative flashing/reinforcing material for penetrations and corners.
• Required whenever preformed vent boots cannot be used.
• Heat welds directly to roofing membrane.

TSR-45 Utility Flashing
Strips .045" thick
reinforced membrane • Membrane cover strips over coated metal joints.
• Stripping-in of coated metal flanges.
• General repairs.

Coated Metal Sheets

25 gauge steel
with .040" thick
membrane film

• Membrane laminated to galvanized sheet metal.
• Cuts and forms like standard sheet metal.
• Roofing and flashing membrane heat welds directly to coated metal.
• Suitable for metal gravel stop and drip edge profiles, metal base and curb flashings, sealant pans, and scupper sleeves.

Product Data Sheet
EverGuard^® TPO
Flashing Accessories

Product Description Benefit/Application

Cut Edge Sealant Solvent-based liquid • Squeeze-bottle application method.

Walkway Pads and Rolls 1/8" thick extruded and embossed TPO • Available in 30" x 36" pads and 30" x 50’ rolls.
• Herringbone traction surfacing.
• Heat welds directly to roofing membrane .
• Safety Yellow and Gray colors.

Drain Inserts Rigid molded TPO • Available for 3", 4", 5", and 6" drains.
• Complete with clamping ring and strainer basket.
• Roofing membrane heat welds directly to drain insert flange.
• Sealant ring at base of insert tube.
• White drain body with gray plastic strainer.

Shipping, Packaging and Handling Information

Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation

Preformed Vent Boots Quantity Boot Size Carton Weight

6 Vent Boots per Carton 1 - 6" Diameter Pipes 9 lbs.

Preformed Corners Quantity Corner Size Carton Weight

5 Pieces (20 corners) per Carton 4" x 4" with 4" flange 9 lbs.

Expansion Joint Covers
- small Quantity Cover Size Carton Weight

50 ft. Continuous Roll 4" Bellows for 1 - 2" Joint Width 50 lbs.

Expansion Joint Covers
- large Quantity Cover Size Carton Weight

50 ft. Continuous Roll 6" Bellows for 2 - 3" Joint Width 65 lbs.

UN-60 Unreinforced
Detailing Membrane Quantity Roll Size Roll Weight

Roll 24" x 33' Roll 25 lbs.

TSR-45 Reinforced
Flashing Strips Quantity Roll Size Roll Weight

Roll 8" x 100' Roll 18 lbs.

Coated Metal Flashing Sheet Size Sheet Weight Sheets per Pallet

4' x 10' 47 lbs. 10 or 30 Sheets

Cut Edge Sealant Quantity Bottle Size Carton Weight

12 Bottles per Carton 1 Pint 24 lbs.

Walkway Pads Quantity Pad Size Pad Weight

1 Pad 30" x 36" 8 lbs.

Walkway Rolls Quantity Roll SIze Roll Weight

1 Roll 30" x 50’ 118 lbs.

Drain Inserts Quantity Drain Size Carton Weight

1 Insert 3", 4", 5", and 6" Diameters 118 lbs.

Storage Store accessory flashing materials in original cartons, rolls or sheets on pallets or shelving in a dry area

Preformed Vent Boots	.075" thick molded membrane	• One standard size accommodates most common pipe and conduit, including square tube. • Heat welds directly to roofing membrane. • Supplied with stainless steel clamping rings.
Preformed Corners	.060" thick molded membrane	• Universal style accommodates both inside and outside corners of base and curb flashing. • Heat welds directly to roofing membrane.
Prefabricated Expansion Joint Covers	.045" thick reinforced membrane with foam-supported bellows	• Two standard sizes to accommodate most common joint widths. • Standard 50 ft. continuous length minimizes joints. • Equipped with metal nailing flanges and membrane welding flaps. • Universal style suitable for both field and wall expansion joint in both flat-mounted and curb-mounted styles. • Heat welds directly to roofing membrane. • Factory-fabricated terminations and transitions available.
UN-60 Detailing Membrane	.060" thick unreinforced membrane	• Alternative flashing/reinforcing material for penetrations and corners. • Required whenever preformed vent boots cannot be used. • Heat welds directly to roofing membrane.
TSR-45 Utility Flashing Strips	.045" thick reinforced membrane	• Membrane cover strips over coated metal joints. • Stripping-in of coated metal flanges. • General repairs.
Coated Metal Sheets	25 gauge steel with .040" thick membrane film	• Membrane laminated to galvanized sheet metal. • Cuts and forms like standard sheet metal. • Roofing and flashing membrane heat welds directly to coated metal. • Suitable for metal gravel stop and drip edge profiles, metal base and curb flashings, sealant pans, and scupper sleeves.

Product	Description	Benefit/Application
Cut Edge Sealant	Solvent-based liquid	• Squeeze-bottle application method.
Walkway Pads and Rolls	1/8" thick extruded and embossed TPO	• Available in 30" x 36" pads and 30" x 50’ rolls. • Herringbone traction surfacing. • Heat welds directly to roofing membrane . • Safety Yellow and Gray colors.
Drain Inserts	Rigid molded TPO	• Available for 3", 4", 5", and 6" drains. • Complete with clamping ring and strainer basket. • Roofing membrane heat welds directly to drain insert flange. • Sealant ring at base of insert tube. • White drain body with gray plastic strainer.

	Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation
Preformed Vent Boots	Quantity	Boot Size	Carton Weight
Preformed Vent Boots	6 Vent Boots per Carton	1 - 6" Diameter Pipes	9 lbs.
Preformed Corners	Quantity	Corner Size	Carton Weight
Preformed Corners	5 Pieces (20 corners) per Carton	4" x 4" with 4" flange	9 lbs.
Expansion Joint Covers - small	Quantity	Cover Size	Carton Weight
Expansion Joint Covers - small	50 ft. Continuous Roll	4" Bellows for 1 - 2" Joint Width	50 lbs.
Expansion Joint Covers - large	Quantity	Cover Size	Carton Weight
Expansion Joint Covers - large	50 ft. Continuous Roll	6" Bellows for 2 - 3" Joint Width	65 lbs.
UN-60 Unreinforced Detailing Membrane	Quantity	Roll Size	Roll Weight
UN-60 Unreinforced Detailing Membrane	Roll	24" x 33' Roll	25 lbs.
TSR-45 Reinforced Flashing Strips	Quantity	Roll Size	Roll Weight
TSR-45 Reinforced Flashing Strips	Roll	8" x 100' Roll	18 lbs.
Coated Metal Flashing	Sheet Size	Sheet Weight	Sheets per Pallet
Coated Metal Flashing	4' x 10'	47 lbs.	10 or 30 Sheets
Cut Edge Sealant	Quantity	Bottle Size	Carton Weight
Cut Edge Sealant	12 Bottles per Carton	1 Pint	24 lbs.
Walkway Pads	Quantity	Pad Size	Pad Weight
Walkway Pads	1 Pad	30" x 36"	8 lbs.
Walkway Rolls	Quantity	Roll SIze	Roll Weight
Walkway Rolls	1 Roll	30" x 50’	118 lbs.
Drain Inserts	Quantity	Drain Size	Carton Weight
Drain Inserts	1 Insert	3", 4", 5", and 6" Diameters	118 lbs.
Storage	Store accessory flashing materials in original cartons, rolls or sheets on pallets or shelving in a dry area