GAF Materials Corporation
1361 Alps Road
Wayne, NJ 07470
Tel: (800) 766-3411
Web site: http://www.gaf.com

Product Data Sheet 
EverGuard^® TPO
TSR - 60 Membrane

GAF EverGuard^® TSR-60 thermoplastic polyolefin single-ply membrane systems have been engineered to provide superior long-term performance and enhanced durability. Strong, flexible EverGuard TSR-60 membrane is suitable for use in all types of single-ply systems:

• Mechanically Attached
• Fully Adhered
• Ballast Applied

Compared to other heavy-duty single-ply EPDM, PVC and TPO membranes, GAF EverGuard TSR-60 roofing membrane provides the benefits of all three materials in a single membrane:

System Type

Main Benefits

EverGuard TPO Membrane

EPDM	Low Installed Cost	Yes
PVC	Heat Welded Seams, White Reflective Color	Yes
TPO	No Liquid Plasticizers, Tear/Puncture Resistance	Yes

Additional features and benefits of GAF EverGuard TSR-60 roofing membrane include:

Advanced formulation • No liquid plasticizers means no concerns about plasticizer migration and related long-term sheet brittleness.

Super-wide 120" membrane sheets • Wider sheets allow faster roof system installation when compared to both "tab-type" systems that provide a securement tab every 50" - 60", and conventional systems with sheets that are only 70" - 80" wide.

Resistant to chemicals, oils and grease • Allows installation on industrial applications, restaurants, etc. where chemical, oil and grease contamination would deteriorate typical PVC and EPDM membranes.*

Heat-welded seams • Heat-welded seams provide superior tensile and peel strength as well as superior long-term performance when compared to taped or glued EPDM membrane seams.

Strong polyester scrim reinforcement • Heat-stabilized, weft inserted polyester scrim reinforcement provides excellent resistance to punctures and tears.

Standard reflective white color • Energy-efficient white membrane reflects significantly more solar radiation than do typical black EPDM membranes, reducing heat load. Also available in gray and tan.

FM/UL approvals • Competitive FM/UL roof system approvals are available for installation over both noncombustible and combustible roof decks.

Single-source responsibility • All materials, including membrane, flashing, insulation, fasteners, and accessories are included in standard guarantee coverage, both NDL and Dollar Per Square guarantees.

Proven performance • In-field installations in all regions of the U.S.

*Damage resulting from oil, grease, or chemicals is not covered under EverGuard guarantee or limited warranty against manufacturing defects.

Product Data Sheet
EverGuard® TPO
TSR - 60 Membrane

Physical Properties ASTM Test Method ASTM Draft Standard
Proposed Minimum EverGuard Test Data

1. Certain data is provided in MD (machine direction) x CMD (cross machine direction) format.
2. Data is based upon typical product performance, and is subject to normal manufacturing tolerance and variance

Nominal Thickness ASTM D-751 0.045" 0.060"

Breaking Strength ASTM D-751 Grab Method 245 lbf/in. 320 lbf x 270 lbf

Seam Strength ASTM D-638 Not Established Pass (membrane failure)

Elongation at Break ASTM D-751 30% 28%

Heat Aging ASTM D-573 90% Retention of Breaking Strength and Elongation at Break 100%

Tear Strength ASTM D-751 8" x 8" Sample 57 lbf 70 lbf x 150 lbf

Puncture Resistance FTM 101B Method 2031 Not Established 380 lbs.

Cold Brittleness ASTM D-2137 Not Established -40° C

Permeance ASTM E-96 Not Established 0.2 Perms

Dimensional Change ASTM D-1204 @158° F, 6 hrs. Not Established 0.4%

Water Absorption ASTM D-471 @158° F, 1 week Not Established 0.7%

Hydrostatic Resistance ASTM D-751Method D Not Established 430 psi

Ozone Resistance ASTM D-1149 Not Established No visible deterioration @ 7 x magnification

Shipping, Packaging and Handling Information

Roll Size Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation

Product Full Roll Size Full Roll Weight Half Roll Size Half Roll Weight

TSR-60 10' x 100'
(1,000 sq.ft.) 340 lbs. 5' x 100'
(500 sq.ft.) 170 lbs.

Packaging Note: Membrane rolls shipped horizontally on pallets. Stacked pyramid-style and banded

Product Full Rolls
Per Pallet Full Roll
Pallet Weight Half Rolls
Per Pallet Half Roll
Pallet Weight

TSR-60 7 2380 lbs. 7 1190 lbs.

Storage Store rolls on their sides on pallets or shelving in a dry area

Installation Tips Membrane rolls are heavy, and are best positioned and installed by at least two men

Advanced formulation	• No liquid plasticizers means no concerns about plasticizer migration and related long-term sheet brittleness.
Super-wide 120" membrane sheets	• Wider sheets allow faster roof system installation when compared to both "tab-type" systems that provide a securement tab every 50" - 60", and conventional systems with sheets that are only 70" - 80" wide.
Resistant to chemicals, oils and grease	• Allows installation on industrial applications, restaurants, etc. where chemical, oil and grease contamination would deteriorate typical PVC and EPDM membranes.*
Heat-welded seams	• Heat-welded seams provide superior tensile and peel strength as well as superior long-term performance when compared to taped or glued EPDM membrane seams.
Strong polyester scrim reinforcement	• Heat-stabilized, weft inserted polyester scrim reinforcement provides excellent resistance to punctures and tears.
Standard reflective white color	• Energy-efficient white membrane reflects significantly more solar radiation than do typical black EPDM membranes, reducing heat load. Also available in gray and tan.
FM/UL approvals	• Competitive FM/UL roof system approvals are available for installation over both noncombustible and combustible roof decks.
Single-source responsibility	• All materials, including membrane, flashing, insulation, fasteners, and accessories are included in standard guarantee coverage, both NDL and Dollar Per Square guarantees.
Proven performance	• In-field installations in all regions of the U.S.

Nominal Thickness	ASTM D-751	0.045"	0.060"
Breaking Strength	ASTM D-751 Grab Method	245 lbf/in.	320 lbf x 270 lbf
Seam Strength	ASTM D-638	Not Established	Pass (membrane failure)
Elongation at Break	ASTM D-751	30%	28%
Heat Aging	ASTM D-573	90% Retention of Breaking Strength and Elongation at Break	100%
Tear Strength	ASTM D-751 8" x 8" Sample	57 lbf	70 lbf x 150 lbf
Puncture Resistance	FTM 101B Method 2031	Not Established	380 lbs.
Cold Brittleness	ASTM D-2137	Not Established	-40° C
Permeance	ASTM E-96	Not Established	0.2 Perms
Dimensional Change	ASTM D-1204 @158° F, 6 hrs.	Not Established	0.4%
Water Absorption	ASTM D-471 @158° F, 1 week	Not Established	0.7%
Hydrostatic Resistance	ASTM D-751Method D	Not Established	430 psi
Ozone Resistance	ASTM D-1149	Not Established	No visible deterioration @ 7 x magnification

Roll Size	Note: Product sizes, dimensions, and widths are nominal values and are subject to normal manufacturing/packaging tolerance and variation
	Product	Full Roll Size	Full Roll Weight	Half Roll Size	Half Roll Weight
	TSR-60	10' x 100' (1,000 sq.ft.)	340 lbs.	5' x 100' (500 sq.ft.)	170 lbs.
Packaging	Note: Membrane rolls shipped horizontally on pallets. Stacked pyramid-style and banded
	Product	Full Rolls Per Pallet	Full Roll Pallet Weight	Half Rolls Per Pallet	Half Roll Pallet Weight
	TSR-60	7	2380 lbs.	7	1190 lbs.
Storage	Store rolls on their sides on pallets or shelving in a dry area
Installation Tips	Membrane rolls are heavy, and are best positioned and installed by at least two men