Lyon Premier Locker Colors

As described below, Lyon’s Premier color selections, clear coat finishes, high gloss finishes and/or a computerized match to your custom color offer a virtually endless combination of choices – including two tone effects.

Our preparation and finishing procedures deliver a superior enameled surface, highly resistant to chipping, cracking and corrosion, to create a lasting impression for your locker installation.

*NEW! OPTIONAL LYON ANTIMICROBIAL LOCKER FINISHES
Lyon Antimicrobial Lockers are finished in an advanced powder coating technology from DuPont that inhibits mold, bacterial and odor build-up on locker surfaces, as well as the touch transfer of microbes on locker handles and doors.

The Antimicrobial powder paint can be added to any metal locker specification, in PART 2 - PRODUCTS under the “FINISHES” heading. Recommended language is: “Exposed steel parts shall be thoroughly cleaned and given a bonding and rust inhibitive phosphate treatment and then electrostatically sprayed with a powder coat finish containing AgIon Antimicrobial compound. Provide a minimum dry film thickness of 1.5 mils. Handles and other plated surfaces shall be coated with a clear powder coat containing AgIon Antimicrobial compound.”

Alternatively, you may include the antimicrobial coating as an “alternate locker finish upgrade” in your specifications when issuing them for bidding and estimating purposes.

Note: the Lyon Antimicrobial Finish is available in all standard and custom colors as well as clearcoat finishes.

*Optional Special High-Gloss Finishes
Available on all Lyon premier colors shown on this screen.

*Optional Special Clear Coat Finishes
Color coat plus one coat of clear acrylic protects and beautifies your locker installation. This extra gloss coat protects the locker finish by making it more durable and mar resistant.

*Optional Three Step, Corrosion Resistant Finishing Process
Whenever additional Corrosion Resistance is specified, Lyon undertakes a rigid three step process to meet this requirement for lockers to be installed in high humidity or corrosive atmospheres.

1. All doors, frames and parts are cleaned and treated with a multi-step detergent/iron phosphate coating, cold water rinsed and sealed with an environmentally sound non-chrome treatment.
2. A prime coat of modified epoxy is applied through an electrostatically charged dip process providing superior coverage and corrosion protection.
3. A finish top coat of high solids polyester paint is applied over the prime coat through an electrostatically charged spray process, maximizing coverage and corrosion protection.

*Additional charges may apply. Please contact LYON for specific costs.

Please contact LYON for color samples before making final color selections and specifications.