Stainless Steel Standoffs

Mogg's Standoffs and related hardware allow for mounting panels at any distance from walls, open stringers, fascia, and balusters. They are available in a variety of sizes and configurations to suit any project. Our standard sizes are listed below, however custom standoffs may be ordered in larger diameters, up to 4 inches if required.

Standoff Base T:
Height: 1/4 inch to 10 inches
Diameter: 1/2 inch to 3 inches

Standoff Base C – flat surface or round tubing spacers:
Height: 1/4 inch to 2 inches
Diameter: 1/2 inch to 3 inches

Standoff Nuts:
Height: 1/2 inch to 3 inches
Diameter: 1/2 inch to 10 inches

Standoff Caps:
Thread Length: 1/2 inch to 2 inches
Diameter: 1/2 inch to 3 inches

Standoffs are available in 304 or 316 stainless steel with a #4 240-grit brushed finish. Gaskets and sleeves are Neoprene and Nylon.