SM AUTOMATIC
3351 Jack Northrop Ave.
Hawthorne, CA 90250-4426
Tel: (310) 559-6405
Toll-Free: (800) 533-3040
Fax: (310) 559-9764
Web site: www.smautomatic.com
E-mail: sales@smautomatic.com


MODEL 300/94001 SERIES DRAPERY SYSTEMS

INTRODUCTION

The Model 300/94001 Series Drapery System is comprised of one of three available drapery motors (models 355, 370 and 375) and Kirsch® 94001 Architrac®.  Motors are selected according to actual drapery weight.

The Model 300/94001 Series Drapery System is available for pinch pleat draperies, as well as the only actual Kirsch branded system for motorized Accordia-Fold®, Ripplefold®, and Archifold®. This was accomplished by designing a motor drive pulley to fit the 94001 Architrac, and modifying the standard Architrac master carrier to adjust and maintain the tension of the operating cable. Roller carriers have also been designed, which incorporates smooth operation to standard Ripplefold, Accordia-Fold and Archifold applications.

FEATURES

  • Electronic Smart motors, with integrated printed circuit boards
  • Available for straight or curved applications
  • Pinch Pleat, Accordia-Fold®, Ripplefold®, and Archifold®
  • Ceiling or wall installations
  • Smart motor circuitry offers plug and play control options, including single or multiplex choices of: switch, radio remote, infrared remote, A/V or lighting control integration
  • Load capacities are actual, and are not subject to reduction as track length increases, as with belt drive designs
  • Extremely quiet operation
TECHNICAL CHARACTERISTICS
  • Maximum system length: 50’
  • Maximum load capacity: 55 lbs. (model 355 motor)
  • Maximum load capacity: 90 lbs. (model 370 motor)
  • Maximum load capacity: 175 lbs. (model 375 motor)
  • Minimum radius: 12”
  • Motor speed: 10” per second
  • Steel cable (plastic coated) track operation
MOTOR SPECIFICATIONS
 
Model 355  Model 370 Model 375
Dimensions (H)x(W)x(D) 6.41" x 4.01" x 2.75" 6.41" x 4.01" x 2.75" 6.41" x 4.01" x 2.75"
Weight 4.1 lbs. 4.5 lbs. 4.6 lbs.
Voltage 115 VAC  115 VAC 115 VAC
Amperage 0.46 A 0.46 A  0.76 A
Cycle  60 Hz  60 Hz  60 Hz
Wattage 60 W 60 W 80 W
Horsepower  0.07 hp 0.07 hp 0.11 hp
Maximum Drapery Weight 44 Ibs. 90 lbs. 175 lbs.
Maximum Track Length 25 ft.  50 ft. 65 ft.
Traversing Speed 10 in/sec 10 in/sec 10 in/sec
Thermal Overload 120°C  120°C 120°C

SPECIFICATIONS

Furnish and install as indicated on drawings and plans, direct drive drapery systems as manufactured by SM Automatic, 10301 Jefferson Blvd., Culver City, CA 90232. Motor shall be UL Listed. System shall be covered by a three-year warranty as published by SM Automatic.
 
 
Model 375/94001 Motorized Drapery System (motor 375):

Motor (375) shall have dimensions 6.41" x 4.01" x 2.75", and have both internal limit switches and thermal overload switch. Motor will operate at 115 volts AC, 0.76 amps, 60 Hz, 60 watts. Motor shall traverse at 10 inches per second. Track shall have exterior dimensions of 1.50" x 1.0625" and be operated by plastic coated steel cable. Track is extruded .050" aluminum in accordance with Aluminum Association Specification No. ASA-C22A21. Track shall be extruded aluminum with white baked enamel finish.
 

Kirsch®, Architrac®, Accordia-Fold®, Ripplefold®, and Archifold® are registered trademarks of Newell Corporation.