Roof Products and Systems
815 Kimberly Drive
Carol Stream, IL 60188
Tel: 800/624-8642
Fax: 866/466-9335
E-mail: info@rpscurbs.com
Web site: www.rpscurbs.com


RPS PIPE OR DUCT MOUNTING PEDESTAL
FOR ALL ROOF SYSTEMS

THE ULTIMATE SOLUTION TO MOUNTING PIPE RUNS ON FLAT OR PITCHED ROOFS

The RPS Equipment Rail assures the proper mounting and flashing base, while the pipe roller assembly allows for pipe movement from expansion and contraction and has 12" vertical and horizontal adjustments to mount pipes level and straight. The RPS Pipe Mounting Pedestal has a full line of features that allows for single to multi-pipe mounting with a minimum of effort and a maximum of speed.


FEATURES & BENEFITS

RPS EQUIPMENT RAIL
See RPS EQUIPMENT RAIL PROFILE.

CONTINUOUSLY THREADED GALV. RODS
allow for height adjustment over the full length of the rods.

STEEL SLIDE CHANNEL
permits a smooth unbroken lateral adjustment over the entire length of the channel… attached to “U” shaped mounting brackets and secured through the side of the counterflashing with lag bolts.

REMOVABLE RETAINER BRACKET
travels with vertical pipe adjustment, allows installer to lay pipe on rollers (no need to thread the needle).

6 ROLLER SIZES
2", 4", 6", 8", 10" & 12" rollers accommodate all pipe sizes up to 12" (for heavy duty larger size pipe mounting pedestal, contact Roof Products & Systems Corp.).

OPTIONAL FEATURES
Longer Equipment Rails and channels, double channels and multi-pipe roller assembly combinations offer multiple pipe mounting on a single equipment rail… all made possible by the Steel Slide Channel Design.


SPECIFICATIONS FOR PIPE MOUNTING PEDESTALS

Furnish and install RPS Pipe Mounting Pedestals as manufactured by Roof Products & Systems Corporation at all necessary specified points or as shown on drawings.

The Pipe Mounting Pedestal shall include an Equipment Rail (Standard 2"  long for single pipe support… see RPS Equipment Rail section for proper style requirement), a single 24" long steel slide channel (or as specified) attached to “U” shaped mounting brackets and secured to side of equipment rail with Lag Bolts supplied. The 2", 4", 6", 8", 10" or 12" pipe roller assembly shall be galvanized 18" long continuous threaded rods to give 12" vertical adjustments, galvanized removable pipe retainer bracket, cast iron pipe rollers and lateral adjust spacer bracket for 12" horizontal adjustment.


SPECIFICATIONS FOR DUCT MOUNTING PEDESTALS

Furnish and install RPS Duct Mounting Pedestals as manufactured by Roof Products & Systems Corporation at all necessary specified points or as shown on drawings.

The Duct Mounting Pedestal shall include an Equipment Rail (See RPS Equipment Rail section for proper style requirement), matching length steel slide channel attached to “U” shaped mounting brackets and secured to side of equipment rail with Lag Bolts supplied. The duct mounting assembly shall have galvanized 18" long continuous threaded rod for 12" vertical adjustment, lateral adjust spacer bracket for 12" horizontal adjustment and a galvanized slide assembly.