Lawrence Metal Products, Inc.
Shipping Address:
260 Spur Drive South
Bay Shore, NY 11706-3900 USA
Mailing Address:
PO Box 400
Bay Shore, NY 11706-0779 USA
Tel: (631) 666-0300
Toll-Free: (800) 441-0019
Fax: (631) 666-0336
E-mail: sales@lawrencemetal.com
Web site: http://www.lawrencemetal.com
Wall Mounted Units TensaBarrier®
Surface Mounted Units
Surface mounted TensaBarrier units are perfect for situations where you want a
permanent but flexible retractable barrier without taking up any floor space.
Used in a wide variety of settings, including airports, multiplex theaters, restaurants,
shopping malls, and banks. They are a terrific solution when portable posts aren’t
appropriate.
A Model 897HC High Capacity 24-Foot Wall Mounted Units
Now available in more finishes!
Now with our patented SlowRetract™ technology! Spans up to 24 feet.
4 3/4" wide by 6" high. Weighs 31/4 lbs.
897HC-1P-33 Black and chrome case
897HC-21-33 Black and red case
897HC-33-33 Black case
897HC-35-33 Black and yellow case
B Model 897 15-Foot Wall Mounted Units
SlowRetract™ technology included! Handsomely styled wall mounted
TensaBarrier® spans 15 feet. Unit case available in solid black,
yellow and black, black and chrome, or black and red. 3 3/4" wide by 53/4"
high. Weighs 1 lb.
897-1P-33 Black and chrome case
897-21-33 Black and red case
897-33-33 Black case
897-35-33 Black and yellow case
C Model 896 71/2 -Foot Wall Mounted Unit
For surface mounting, with SlowRetract™ belt cassette. Center tape exit
is standard. Left or right exit on request. Spans 71/2'. Mounting plate is 41/8"
wide by 23/4" high. Available in all powder coated, steel and brass finishes.
D Model 898 Wall Receiver
Automatic locking feature, used to connect belt ends to a wall.
Model 893-MAG
Magnetic tape end panic breakaway.
Model 893-BRK Breakaway System
Provides a panic breakaway in both directions.
Removable Mounted Units
Removable mounted TensaBarrier units are identical to our surface mounted units,
but mount to the wall surface using their low profile QuickRelease™ mounting
plate, which allows the unit to be removed and attached with ease. Perfect for
areas where a flexible retractable barrier is needed on a periodic basis, without
taking up any floor space. Used in a wide variety of settings, including airports,
multiplex theaters, restaurants, shopping malls, and casinos, they are a terrific
solution when our standard surface mounted units aren’t appropriate.
E Model 897HCR 24-Foot High Capacity Removable Units
Now with our patented SlowRetract™ technology! Spans up to 24 feet. 43/4"
wide by 6" high. Weighs 31/4 lbs. Complete with QuickRelease™ mounting
plate.
897HCR-1P-33 Black and chrome case
897HCR-21-33 Black and red case
897HCR-33-33 Black case
897HCR-35-33 Black and yellow case
F Model 897R 15-Foot Wall Mounted Units
SlowRetract™ technology included! Handsomely styled wall mounted TensaBarrier®.
Spans 15 feet. Unit case available in solid black, yellow and black, black and
chrome, or black and red. 33/4" wide by 53/4" high. Weighs 1 lb. Complete
with QuickRelease™ mounting plate.
897R-1P-33 Black and chrome case
897R-21-33 Black and red case
897R-33-33 Black case
897R-35-33 Black and yellow case
G Model 896R 71/2-Foot Wall Mounted Unit
For surface mounting, with slow retracting belt cassette. Center belt exit is
standard. Left or right exit on request. Spans 71/2'. Mounting plate is 41/8"
wide by 23/4" high. Complete with Quick-Release™ mounting plate.
H Model 730311
Additional QuickRelease™ mounting plate.
Warehouse Wall Units
Flexible, clamp-mounted units go wherever they’re needed.
These innovative units mount onto storage racks such as those found in warehouse stores, factories, and stockrooms. Close off an aisle with ease to restrict access during stocking or product retrieval. Essential when using forklifts near the public. Available with two unique mounting options: Speedhook™ and magnet, or clamp.
Models 897HCC & 897HCM 24-Foot High Capacity Warehouse Units
Comes complete with S-Clip belt-end. Available in all 897HC finishes. Spans up to 24 feet. 43/4" wide by 6" high. 897HCC With clamp for semi-permanent installation. 897HCM Attaches to rack with SpeedHook™ and Magnet, for quick installation and removal.
Models 897C & 897M 15-Foot Warehouse Units
Comes complete with S-Clip belt-end. Available in all 897 finishes. Spans up to 15 feet. 33/4" wide by 53/4" high. 897C With clamp for semi-permanent installation. 897M Attaches to rack with SpeedHook™ and Magnet, for quick installation and removal.
Concealed Wall Units
Flush mounting provides maximum clearance and enhanced appearance.
Our concealed mounted units are installed flush with your wall surface for a zero-clearance solution. Perfect for closing off checkout aisles in supermarkets, pharmacies, retail stores, and restaurants. Can also be used to temporarily restrict access to hallways and off-limits areas.
An available alarm feature automatically sounds whenever unauthorized disengagement occurs.
I Model 894 15-Foot Concealed Mounted Unit with Door
Available in stainless steel or black, with hinged door. Spans up to 15'. 35/8"
by 61/2". Lock for door is available; inquire for details.
894-H-3S Horizontal
894-V-3S Vertical Stainless Steel housing.
894-H-33 Horizontal
894-V-33 Vertical Black housing.
Model 892 71/2-Foot Concealed Mounted Unit with Door
Identical to Model 894 but with 7 1/2' of retractable belt.
892-H-3S Horizontal
892-V-3S Vertical Stainless Steel housing.
892-H-33 Horizontal
892-V-33 Vertical Black housing.
J Concealed Wall Mounted Unit
With smaller housing for easy installation. Available in Black, other colors available
as custom.
892N 71/2' belt
894N 13' belt.
Alarmed Concealed Wall Mounted Unit
Alarm feature with re-set button will sound when there is movement
on belt. Speaker on mounting plate.
892NAL 7' belt
894NAL 13' belt
K Model 896CM 71/2-Foot Concealed Mounted Unit
Spans up to 7 1/2'. 4 1/8" wide by 2 3/4" high.
Replacement Belt Cassettes
L Tensa™ Replacement Belt Cassettes.
Replacement belt cassettes can be easily installed in the event of wear
or damage, or even for a quick color change! (Changing the metal head is almost
never necessary). Includes SlowRetract™ spring mechanism and automatic locking
belt receivers.
800 Series 4-way Cassette
M Model 895 TensaBarrier Head
Include SlowRetract, 4-way tape cassette. Used primarily for converting older
posts. Call us to discuss your application.
N Model 895-RCVR Receiver Only Head
4-way connection without tape.
O Model 898 Wall Receiver
With automatic locking feature. Use to connect tape ends to a wall.
P Model 891 Replacement Tape-End Piece