FinPan
3255 Symmes Road
Hamilton, OH 45015
Toll Free: (800) 833-6444
Fax: (513) 870-9606
Web site: www.finpan.com
E-mail: sales@finpan.com

Util-A-Crete: The Front-Runner in Backer Board™

Product Description

Util-A-Crete® is a lightweight, concrete backer board specifically designed to provide a permanent base for a wide variety of both interior and exterior construction applications. Made of durable portland cement, alkaline resistant fiberglass mesh and lightweight aggregate, Util-A-Crete is a superior underlayment for ceramic tile and other facing materials used on walls, ceilings, floors, countertops and exteriors. Util-A-Crete is non-toxic, environmentally safe, contains no asbestos, and is non-combustible.


With a compressive strength of =2600 psi (ASTM D 2394) and flexural strength of =1500 psi (ASTM C 947), Util-A-Crete is proven to be the strongest backer board in the industry ideal for high impact areas such as foyers, kitchens, bathrooms and utility rooms.

Unlike wood or gypsum-based products, Util-A-Crete is unaffected by water, moisture or steam and will not decay, warp, rot or soften. It actually increases in strength and hardness over time. This makes it well-suited for areas constantly exposed to water such as spas, steam rooms and indoor pools.

Available Sizes

Thickness – In. Width Length Edge Wt. / Sq. Ft.
1/4" 3’ 4’, 5’, 64” Wrapped 1.98
1/2" 3’ 4’, 5’, 64”, 6', 8'* Wrapped 3.0
5/8" 3’ 4’, 5’, 6' Wrapped 3.5
*Special Order        

Util-A-Crete is available in a variety of sizes and thicknesses. The 1/2” and 5/8” backer boards feature a wrapped, tapered edge which makes them easier to handle and install.


The thinner 1/4” board was specifically designed for today’s dramatic new tile, marble and stone applications on floors and countertops. When applied under ceramic floors, 1/4” Util-A-Crete reduces the need to shorten doors over thresholds and reduces level variations when abutting carpet and other flooring materials. As a countertop substrate, Util-A-Crete is easier to cut and install. The combination of flexibility and strength make 1/4” Util-A-Crete the ideal underlayment for interior and exterior curved applications.

Util-A-Crete Features
  • 1/4", 1/2", and 5/8" thicknesses; sizes up to 8' by 3’ wide
  • Wrapped, tapered edge
  • Water and moisture resistant
  • Contains Portland cement, fiberglass mesh, and lightweight aggregate
  • No additives or fillers
  • Approved for interior and exterior use
  • Low coefficient of expansion and contraction
Benefits
  • 1/4" ideal for curved tile applications
  • Easy to cut, score and install
  • Superior fastener pull-through resistance
  • Unsurpassed flexural and compressive strength
  • Will not decay, warp, soften, rot or swell
  • Can be fastened with nails or screws
  • Increases in strength and hardness over time

Limitations

  • Util-A-Crete Backer Board is water resistant, but allows water and water vapor passage. If total waterproofing is required, the use of a water-proofing membrane is mandatory.
  • Util-A-Crete units are not to be used as structural load-bearing members.
  • Util-A-Crete must never be used over cushioned vinyl flooring. This type of flooring must be removed before Util-A-Crete is installed.

Util-A-Crete is a registered trademark of FinPan, Inc.© FinPan, Inc.