Common Work Results for Metals

Below you will find links to company and product information for manufacturers and suppliers listed in the Common Work Results for Metals section of Sweets... more


1,241 Products
Results per page:

McNichols Co. - Round Perforated, 16 Gauge Plain Steel, 1/2" Round on 11/16" Staggered, 48.0000" x 96.0000" - 161261
McNichols Co. - Round Perforated, 16 Gauge Plain Steel, 1/2" Round on 11/16" Staggered, 48.0000" x 96.0000" - 161261
Description: Round Perforated, 16 Gauge Plain Steel, 1/2" Round on 11/16" Staggered, 48.0000" x 96.0000" - 161261

Manufacturer: McNichols Co.

Category: architectural metal | metals | metals disbributors...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Decorative Formed Metal...


Fine's Gallery - Majestic Bronze Base - BB-101
Fine's Gallery - Majestic Bronze Base - BB-101
Description: Majestic Bronze Base - BB-101 Model: Majestic Bronze Base - BB-101 A stunning bronze base with elaborately detailed artwork for fine home decorating. Skillfully crafted in two tones of bronze, this piece is the perfect accent for a front entrance. Enhance the beauty of your home today with this...

Manufacturer: Fine's Gallery

Category: architectural columns | architectural sheet metal | bronze bases...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Formed Metal Fabrications...


Certainteed Commercial Roofing - Commercial Roofing FlintFast® #12 Fasteners
Certainteed Commercial Roofing - Commercial Roofing FlintFast® #12 Fasteners
Description: Commercial Roofing FlintFast® #12 Fasteners Model: Commercial Roofing FlintFast® #12 Fasteners CertainTeed FlintFast® #12 Fasteners are engineered to improve application efficiency and increase the strength of the mechanical attachment, providing top quality performance in commercial roofing...

Manufacturer: Certainteed Commercial Roofing

Category: mechanically attached membranes | metal fasteners | roofing...

MasterFormat: Common Work Results for Metals | Metal Fastenings | Membrane Roofing


GAF - Lock-Down Primer
GAF - Lock-Down Primer
Description: Description Lock-Down Primer is a single component, moisture-cured, low viscosity polyurethane primer designed to provide maximum corrosion protection, rust inhibition, and adhesion over steel, aluminum, and galvanized metal surfaces. Sizes Available: 1 gallon (3.8 liter) can 5 gallon (19 liter)...

Manufacturer: GAF

Category: aluminum coatings | bond coatings | chemical resistant coatings...

MasterFormat: Common Work Results for Metals | Painting and Coating | High-Performance Coatings...


Petersen Aluminum Corporation - Custom Fabrication
Petersen Aluminum Corporation - Custom Fabrication
Description: Custom Fabrication Model: Custom Fabrication Understanding that it’s all in the details puts PAC-CLAD above and beyond in providing custom fabrication that exceeds the most exacting requirements. With state-of-the-art technology and insightful expertise, Petersen ensures unmatched quality and...

Manufacturer: Petersen Aluminum Corporation

Category: metal fabrication | metal forming | metals fabrication services...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Formed Metal Fabrications...


Pittcon Industries - CM-20 Crown Moldings
Pittcon Industries - CM-20 Crown Moldings
Description: CM-20 Crown Moldings Model: CM-20 Crown Moldings Custom Radius Combination

Manufacturer: Pittcon Industries

Category: decorative aluminum | sheet metal | specialty aluminum...

MasterFormat: Common Work Results for Metals | Decorative Formed Metal | Finish Carpentry...


Historical Bronze Works - HBW-C04 Canopies
Historical Bronze Works - HBW-C04 Canopies
Description: HBW-C04 Canopies Model: HBW-C04 Canopies Architectural metal canopies are important design elements over entrances and windows. Historical Bronze canopies are used for both historical restorations and new construction. Available in a variety of ornamental metals including bronze, aluminum or...

Manufacturer: Historical Bronze Works

Category: canopies | canopy | protective covers...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Exterior Specialties...


Acoustical Surfaces, Inc. - Acoustimetal Perforated Metal Panels
Acoustical Surfaces, Inc. - Acoustimetal Perforated Metal Panels
Description: Introducing Acoustimetal ™ , the latest advancement in noise control and acoustic treatment. Acoustimetal ™ combines the durability of a perforated metal shell and the superior noise control, properties of our exclusive nonflammable acoustical material. Acoustimetal ™ is ideal for demanding...

Manufacturer: Acoustical Surfaces, Inc.

Category: acoustical ceilings | noise barriers | sound absorbers...

MasterFormat: Common Work Results for Metals | Metal Specialties | Decorative Formed Metal...


Owens Corning -  Commercial Insulation Products
Owens Corning - Commercial Insulation Products
Description: No matter what you need, Owens Corning has a solution for your building project. From exterior wall solutions to roofing systems Owens Corning can help you achieve all your building goals. Click an area of the building for product listings, specifications, MSDS sheets, and more information....

Manufacturer: Owens Corning

Category: IRMA | air ducts | noise absorbers...

MasterFormat: Common Work Results for Metals | Concrete Forming and Accessories | Concrete Accessories...


DHD International Inc - Tension Truss - STRUCTURAL GLASS WALL - 446-2-1
DHD International Inc - Tension Truss - STRUCTURAL GLASS WALL - 446-2-1
Description: Tension Truss - STRUCTURAL GLASS WALL - 446-2-1 Model: 446-2-1 The Austvision Tension Rod Truss Glass Facade System is supplied with suspended point fixed glass with high tension stainless steel vertical or horizontal trusses as wind bracing. The tension rod truss system utilises two...

Manufacturer: DHD International Inc

Category: all-glass facades | cladding | glazed facades...

MasterFormat: Common Work Results for Metals | Entrances and Storefronts | Storefronts...


Architectural Grille - Decorative Panels & Screens
Architectural Grille - Decorative Panels & Screens
Description: Decorative Panels & Screens Model: Decorative Panels & Screens Custom laser-cut metal panels and screens have a wide scope of decorative interior and exterior applications that are only limited by your imagination. Architectural Grille can help turn your inspirational design/pattern into a...

Manufacturer: Architectural Grille

Category: formed metal | metal paneling | metal stampings...

MasterFormat: Common Work Results for Metals | Finish Carpentry | Furnishings and Accessories...


Rakks/Rangine Corporation - Handrail System 700
Rakks/Rangine Corporation - Handrail System 700
Description: Handrail System 700 Model: Handrail System 700 SYSTEM 700 This 7” handrail system meets or exceeds all major building codes as well as ADA requirements for handrails. Solid wood trim offers a secure and ergonomic gripping surface. Extruded aluminum body provides maximum strength to protect walls...

Manufacturer: Rakks/Rangine Corporation

Category: accessible products | aluminum hand rails | bumper rails...

MasterFormat: Common Work Results for Metals | Metal Railings | Wood Railings...


Ametco Manufacturing Corporation - Perforated Metal Sun Shades
Ametco Manufacturing Corporation - Perforated Metal Sun Shades
Description: Perforated Metal Sun Shades Model: Perforated Metal Sun Shades Ametco perforated Sun Shades begin with 1/8" thick aluminum or galvanized sheets that provide from 10% to 50% open area. There are numerous patterns and styles of perforations to choose from. The angle or tube frame required is...

Contech Engineered Solutions - Metric Sheeting
Contech Engineered Solutions - Metric Sheeting
Description: A Unique Steel Sheeting with the Industry’s Best Strength to Weight Ratio. Cold-formed Contech Metric Sheeting serves where heavy hot-rolled sheeting is impractical & where other materials are structurally inadequate. Metric Sheeting's unique profile gives it a higher degree of stiffness. Metric...

Manufacturer: Contech Engineered Solutions

Category: formed metal | steel | steel products...

MasterFormat: Common Work Results for Metals | Metal Specialties | Erosion and Sedimentation Controls...


Berridge Metal Roof and Wall Panels - BERRIDGE PAINTED & UNPAINTED COIL MATERIAL
Berridge Metal Roof and Wall Panels - BERRIDGE PAINTED & UNPAINTED COIL MATERIAL
Description: BERRIDGE PAINTED & UNPAINTED COIL MATERIAL Model: BERRIDGE PAINTED & UNPAINTED COIL MATERIAL PRODUCT INFORMATION Berridge Manufacturing Company offers premium, flouropolymer coated Galvalume® coil material in 24 & 22 Gauge painted with full-strength Kynar 500® or Hylar 5000™ resins. Kynar 500®...

Manufacturer: Berridge Metal Roof and Wall Panels

Category: coiled steel | metals | steel coils

MasterFormat: Common Work Results for Metals | Metal Fabrications | Metal Specialties


Siplast Roofing & Waterproofing - Fasteners for Lightweight Insulating Concrete
Siplast Roofing & Waterproofing - Fasteners for Lightweight Insulating Concrete
Description: Siplast Roofing & Waterproofing 1000 Rochelle Boulevard Irving, TX 75062 Tel: (469) 995-2205 Tollfree: (800) 922-8800 E-mail: usinfo@siplast.com Web site: http://www.siplast.com

Manufacturer: Siplast Roofing & Waterproofing

Category: cementitious roof insulation | hardware | heat insulation...

MasterFormat: Common Work Results for Metals | Metal Fastenings | Thermal Protection...


Campbellsville Industries, Inc. - Cornices
Campbellsville Industries, Inc. - Cornices
Description: An endless variety of shapes, designs, and ornaments are combined to create graceful custom cornice systems from Campbellsville Industries. The planning and creation of a custom cornice system is a demanding art, and requires the skills of artisans and craftsmen from inspiration to completion....

Manufacturer: Campbellsville Industries, Inc.

Category: castings | colored stainless steel | custom metal castings...

MasterFormat: Common Work Results for Metals | Formed Metal Fabrications | Decorative Metal...


Feeney, Inc. - CableRail Custom Cable Assemblies
Feeney, Inc. - CableRail Custom Cable Assemblies
Description: Architectural Hardware That Anticipates Any Cable Design. Projects with special installation conditions or design considerations may require certain styles of cable and fittings not addressed by our CableRail Standard Cable Assemblies. To fulfill those specific design and function needs, Feeney...

Manufacturer: Feeney, Inc.

Category: cable guardrails | cable railings | custom railings...

MasterFormat: Common Work Results for Metals | Security Metal Fastenings | Wire Rope Assemblies...


PPG Metal Coil & Extrusion Coatings - DURASTAR® Super-Polyester Coil Coatings
PPG Metal Coil & Extrusion Coatings - DURASTAR® Super-Polyester Coil Coatings
Description: For outdoor applications—whether agricultural, industrial or building panel systems—it is imperative that coatings withstand weather and still maintain a quality aesthetic. Durastar polyester coil coatings offer excellent performance and color retention against harsh conditions. They are designed...

Hollaender Mfg. Co. - Interna-Rail® Decorative Metal Railings
Hollaender Mfg. Co. - Interna-Rail® Decorative Metal Railings
Description: System Description For projects that require a continuous, sleek architectural design and finish. Components Applications Interna-Rail ® and Speed-Rail ® can also be used with 2 & 3-Line horizontal rails in waste water treatment plants, OSHA applications, and infill panels (glass, composite,...

Manufacturer: Hollaender Mfg. Co.

Category: meshes | railing accessories | specialty railings...

MasterFormat: Common Work Results for Metals | Metal Fastenings | Metal Fabrications...


C.R. Laurence Co., Inc. - Architectural Metal Systems
C.R. Laurence Co., Inc. - Architectural Metal Systems
Description: C.R. Laurence Co., Inc. 2503 E. Vernon Ave. Los Angeles, CA 90058 Toll Free: (800) 421-6144 Fax: (800) 262-3299 E-mail: architect@crlaurence.com Web site: http://www.crlaurence.com Web site: http://www.crl-arch.com

Manufacturer: C.R. Laurence Co., Inc.

Category: custom fabrications | shading devices | solar control products...

MasterFormat: Common Work Results for Metals | Decorative Metal | Decorative Formed Metal...


Akzo Nobel Coatings, Inc. - POLYDURE® Polyester Paint System
Akzo Nobel Coatings, Inc. - POLYDURE® Polyester Paint System
Description: POLYDURE ® is our best straight polyester paint system that serves a variety of different markets such as garage and entry doors to laundry and HVAC uses. The specifications may vary with the differing markets, but the versatility of the proprietary core polyester allows our chemists to produce...

Manufacturer: Akzo Nobel Coatings, Inc.

Category: exterior coatings | finish coatings | polyester coatings...

MasterFormat: Common Work Results for Metals | Shop-Applied Coatings for Metal | Painting and Coating...


Schlage Residential Security - Handrail Bracket
Schlage Residential Security - Handrail Bracket
Description: Features Allegion, plc 11819 N. Pennsylvania Street Carmel, IN 46032 Tel: (888) 925-2171 E-mail: ContactUs@allegion.com Web site: http://www.Allegion.com/us

Manufacturer: Schlage Residential Security

Category: architectural railings | handrail brackets | handrails...

MasterFormat: Common Work Results for Metals | Metal Fastenings


Hansen Architectural Systems, Inc. - Custom Architectural Elements
Hansen Architectural Systems, Inc. - Custom Architectural Elements
Description: Alumashade is home to a sophisticated metalworking and fabrication shop designed to deliver high precision products. We are an authority on architectural metals used for commercial buildings and aim to serve the exacting needs of the worlds best construction companies by providing complete...

Manufacturer: Hansen Architectural Systems, Inc.

Category: custom designed railings | glass railing systems | guardrails...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Metal Specialties...


Eckel Industries Inc. - Standard Facings and Trims
Eckel Industries Inc. - Standard Facings and Trims
Description: Standard Facings and Trims Model: Standard Facings and Trims Eckel Industries metal perforated acoustical panel sheet facings are available in aluminum or steel of three different types; 22GA standard perforated, 0.032 embossed aluminum and 24 GA textured aluminum or steel. Five patterns are...

Manufacturer: Eckel Industries Inc.

Category: acoustical ceiling panels | acoustical insulation | noise mitigation...

MasterFormat: Common Work Results for Metals | Metal Fabrications | Wall Finishes...