Epoxy Coatings

Below you will find links to company and product information for manufacturers and suppliers listed in the Epoxy Coatings section of Sweets... more


99
17
Products
Results per page:

LATICRETE International, Inc. - SPARTACOTE® SURFACE BUILD SL 110™ Epoxy Coating
LATICRETE International, Inc. - SPARTACOTE® SURFACE BUILD SL 110™ Epoxy Coating
Description: SPARTACOTE® SURFACE BUILD SL 110™ Epoxy Coating Model: SPARTACOTE® SURFACE BUILD SL 110™ SPARTACOTE® SURFACE BUILD SL 110™ is a medium viscosity, 100% solids, self-leveling epoxy concrete primer and intermediate coating. Features

Manufacturer: LATICRETE International, Inc.

Category: base coatings | base coats | bond coats...

MasterFormat: Epoxy Coatings | Concrete Finishing | Painting and Coating...


GAF - StreetBond® WB Concrete Primer
GAF - StreetBond® WB Concrete Primer
Description: StreetBond ® WB Concrete Primer is a clear, single-component epoxy primer specifically designed to increase the bond of StreetBond ® coatings to concrete surfaces. 5 gallon (19 liter) pail GAF 1 Campus Drive Parsippany, NJ 07054 Tollfree: (800) 766-3411 Web site: http://www.gaf.com

PPG PAINTS™ - AMERLOCK 400 BF Epoxy Masonry Block Filler
PPG PAINTS™ - AMERLOCK 400 BF Epoxy Masonry Block Filler
Description: Two-component, epoxy masonry block filler USA & CANADA INFRASTRUCTURE | POWER EPOXY HIGH SOLIDS PPG PAINTS™ 400 Bertha Lamme Drive Cranberry Township, PA 16066 Technical Service: (800) 441-9695 Architect/Specifier: (888) 774-4332 Email: ppgspec@ppg.com Web site: http://www.ppgpaints.com

Manufacturer: PPG PAINTS™

Category: block fillers | coatings | coatings...

MasterFormat: Epoxy Coatings | Cast-In-Place Concrete | Painting...


Behr Process Corporation - BEHR PREMIUM® Non-Skid Floor Finish Additive No. 970
Behr Process Corporation - BEHR PREMIUM® Non-Skid Floor Finish Additive No. 970
Description: BEHR PREMIUM® Non-Skid Floor Finish Additive No. 970 Model: BEHR PREMIUM® Non-Skid Floor Finish Additive No. 970 Add a subtle texture to your topcoat finish with our BEHR PREMIUM Non-Skid Floor Finish Additive. Simply add to our opaque finished Behr Premium Floor Coating products such as; 2-Part...

Super-Krete Products - SK-E200 - Epoxy
Super-Krete Products - SK-E200 - Epoxy
Description: SK-E200 - Epoxy Model: SK-E200 - Epoxy SK-E200 is a two component water-based epoxy with excellent adhesion and rapid cure times. Its unique chemistry provides short re-coat times and good low temperature curing. This material has little odor, applies easily and adheres to damp concrete. SK-E200...

Manufacturer: Super-Krete Products

Category: finishes | pedestrian traffic coatings | resin coatings...

MasterFormat: Epoxy Coatings | Pedestrian Traffic Coatings | Flooring...


Dur-A-Flex Inc. - Dur-A-Wall Epoxy Wall System
Dur-A-Flex Inc. - Dur-A-Wall Epoxy Wall System
Description: Dur-A-Wall is an epoxy wall system with a urethane topcoat designed to be durable, sanitary and easy to clean. It is ideally suited to coat concrete, drywall, cement board or block. Dur-A-Flex Inc. 95 Goodwin St. East Hartford,CT 06108 Tel: (860) 528-9838 Fax: (860) 528-2802 Tollfree: (877)...

Maxxon® Corporation - Maxxon® MVP (Moisture Vapor Protection)
Maxxon® Corporation - Maxxon® MVP (Moisture Vapor Protection)
Description: Product Description: Maxxon ® MVP (Moisture Vapor Protection) is a unique 2-component, moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or below grade. Maxxon MVP eliminates delamination...

Manufacturer: Maxxon® Corporation

Category: base coatings | bond coatings | coatings...

MasterFormat: Epoxy Coatings | Cast-In-Place Concrete | Thermal Protection...


Solomon Colors, Inc. - Sealers and Additives
Solomon Colors, Inc. - Sealers and Additives
Description: Sealers are an imperative part of a long lasting and beautiful decorative concrete surface. Simple integrally colored slabs, intricately stamped patios, overlaid sidewalks, and stained interior floors all need a quality sealer to be the best they can be for as long as they can. Low-build and...

Key Resin Company - Decorative Quartz Resinous Flooring Systems
Key Resin Company - Decorative Quartz Resinous Flooring Systems
Description: Key Quartz Systems are a series of decorative resin floor systems composed of 100% solids clear epoxy resin filled with a variety of graded quartz aggregates. A wide selection of gloss, satin and chemical resistant finish coats are available. Key Quartz Systems range from 1/8" to 1/4" and can be...

Manufacturer: Key Resin Company

Category: acid resistant coatings | concrete coatings | deck coatings...

MasterFormat: Epoxy Coatings | Flooring | Fluid-Applied Flooring...


The Stonhard Group - Stonglaze Epoxy & Urethane Wall Systems
The Stonhard Group - Stonglaze Epoxy & Urethane Wall Systems
Description: Seamless protection for walls. Smooth, splash and stain-resistant wall glazes that work in conjunction with Stonhard floor systems. Stonglaze VSD : Wall system designed for use on drywall surfaces. This system is reinforced with an engineering fabric for enhanced mechanical strength. Stonglaze...

Wooster Products, Inc - Walk-A-Sured Clear and Roll-On Epoxy Floor Coating
Wooster Products, Inc - Walk-A-Sured Clear and Roll-On Epoxy Floor Coating
Description: A two component, ambient temperature cure, epoxy system offering the unique feature of being a waterclear, transparent prevention method for slips and falls. This system is eco-friendly and contains no solvents. With this solvent-free quality, it can be applied over old coatings without raising...

MCOR - MCOR 5105 - mCrete R Compound - Polymeric Cement
MCOR - MCOR 5105 - mCrete R Compound - Polymeric Cement
Description: MCOR 5105 (mCrete R Compound) is a two-component moisture insensitive, highly adhesive, chemical resistant, 100% solids, high strength epoxy paste with superior adhesion. Incorporating toughened silica for industrial durability with fiber-reinforcement blending in its matrix to create a...

Manufacturer: MCOR

Category: bolt anchoring | patching compounds | repair compounds...

MasterFormat: Epoxy Coatings | Concrete Finishing | Adhesives*...


Textured Coatings of America, Inc. - XL 70® "W" Architectural Coatings
Textured Coatings of America, Inc. - XL 70® "W" Architectural Coatings
Description: TEX·COTE ® XL 70 ® "W" Textured Coating is a water-based, high-build, advanced epoxy-acrylate resin system specially formulated to provide a weatherproof coating over cured or uncured concrete masonry surfaces. The ability to go over damp or high alkaline surfaces is a key feature. TEX·COTE ® XL...

Rust-Oleum Corporation - High Performance Coatings
Rust-Oleum Corporation - High Performance Coatings
Description: Multi-purpose, low VOC water-based acrylic enamel that allows for convenient Direct-To-Metal (DTM) coating with minimal odor. Tint bases also available for custom colors. * Can be used in USDA facilities based on FSIS Directive 11,000.4 (Rev. 1), November 24, 1995. ** Agriculture Canada (also...

Manufacturer: Rust-Oleum Corporation

Category: alkyd coatings | exterior coatings | floor coatings...

MasterFormat: Epoxy Coatings | Flooring | High-Performance Coatings...


Elite Crete Systems, Inc. - High Performance Industrial Floor Coatings
Elite Crete Systems, Inc. - High Performance Industrial Floor Coatings
Description: Elite Crete Systems manufacturers a complete line of protective resinous floor coatings for commercial, industrial and institutional facilities. Systems and finishes include; high wear resistance, chemical resistance, flake & quartz broadcast, trowel slurry finishes, neat applications and more....

Epoxytec - UME Composite System - Concrete Tank Lining System
Epoxytec - UME Composite System - Concrete Tank Lining System
Description: System Description: The UME Composite System is a design system recommendation for rehabilitating and lining aged water and wastewater structures. The system also provides a proper specification for the execution of lining newly installed treatment structures. The intent of this system is to...

General Polymers, The Sherwin-Williams Company - Waterproofing
General Polymers, The Sherwin-Williams Company - Waterproofing
Description: When it comes to seamless systems, the General Polymers product line is the most comprehensive in the industry. Chemistries include cementitious, acrylic, epoxy, Novolac, and urethane elastomers...