Modified Crystalline Concrete Waterproofing Coating

Xypex Modified can be applied as a second coat to reinforce Xypex Concentrate, or applied by itself to dampproof the exterior of foundation walls.

Applied as a second coat, Xypex Modified chemically reinforces Xypex Concentrate where two coats are required and produces a harder finish. Where dampproofing is required, a single coat of Modified may be used as an alternative to a spray/tar emulsion. Xypex prevents the penetration of water and other liquids from any direction by causing a catalytic reaction that produces a non-soluble crystalline formation within the pores and capillary tracts of concrete and cement-based materials.

• Reservoirs
• Sewage and Water Treatment Plants
• Secondary Containment Structures
• Tunnels and Subway Systems
• Underground Vaults
• Foundations
• Parking Structures
• Swimming Pools

• Resists extreme hydrostatic pressure
• Becomes an integral part of the substrate
• Allows concrete to breathe
• Resistant to aggressive chemicals
• Non-toxic
• Does not require dry weather or a dry surface
• Cannot puncture, tear or come apart at the seams
• No costly surface priming or leveling prior to application
• Does not require sealing, lapping and finishing of seams at corners, edges or between membranes
• Can be applied to the positive or the negative side of the concrete surface
• Does not require protection during backfilling or during placement of steel, wire mesh or other materials
• Less costly to apply than most other methods
• Not subject to deterioration
• Permanent

Xypex Modified is available in 60 lb. (27.2 kg) pails and 50 lb. (22.7 kg) bags.

For normal surface conditions, the coverage rate for each coat is 6 - 7.2 sq. ft. per lb. (1.25 - 1.5 lb. per sq. yd. or 0.65 - 0.8 kg/m²).

See More

See Less