Sika Corporation -Weather Barriers - Sikaflex®-11 FC

DOWNLOADS

One part advanced polyurethane, elastomeric sealant/adhesive

Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity.


Category: ceramic tile adhesives | polyurethane adhesives | urethane sealants...

MasterFormat: Maintenance of Metals | Wood, Plastic, and Composite Fastenings | Adhesives*...


Related Products

Overview


Weather Barriers - Sikaflex®-11 FC

One part advanced polyurethane, elastomeric sealant/adhesive

Sikaflex®-11 FC is a one-component, gun-grade, adhesive and sealing compound of permanent elasticity. This dual-purpose material is based on a special moisture-cured polyurethane with an accelerated curing time that meets ASTM C920 Type S, Grade NS, Class 12.5, Use NT, I, M, G, A, O. and Federal Specification TT-S-00230C.

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin.
  • Fast cure rate.
  • Good weathering and water resistance.
  • Non-corrosive.
  • Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended).
  • High durability.
  • Can be used in tamper resistant joints

Usage

As an elastic adhesive for:
  • Cover plates, gaskets and coverings.
  • Acoustic ceiling tiles.
  • Floor moldings and door sills.
  • Light weight construction materials.
  • Wood or metal and door frames.
  • Roof tiles.
As an elastic joint sealer for:
  • Air ducts and high vacuum systems.
  • Containers, tanks, and silos.
  • Gaskets in openings in walls or floors for ducts, piling, etc.
  • Reservoirs or water retaining structures.
  • Aluminum fabrication.
  • Bolted lap joints.

Advantages

  • Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin.
  • Fast cure rate.
  • Good weathering and water resistance.
  • Non-corrosive.
  • Can be painted over with water, oil, and rubber-based paints. (Preliminary tests recommended).
  • High durability.
  • Can be used in tamper resistant joints

Packaging

10.1 fl.oz. (.300 ml) plastic cartridges, 24/case.

20 fl.oz. (600 ml) uni-pac sausages, 20/case.

Color

White

Product Details

Product Information

Shelf Life

12 months in unopened container.

Storage Conditions

Store at 40-95 °F (4-35 °C).

Condition material to 65-75 °F before using.

Volatile organic compound (VOC) content

28.5 g/L

Technical Information

Chemical Resistance

Good resistance to water, weak acids, weak alkalis, sewerage, mineral oils, vegetable oils, fats, fuels. (Not resistant to organic solvents, paint thinner, strong acids, strong alkalis). Consult Technical Service for specific data.

Service Temperature

-40 °F to 170 °F

Resistance to Weathering

Excellent

Application

Application Information

Ambient Air Temperature

40 °F to 100 °F.

Sealant should be installed when joint is at mid-range of its anticipated movement.

Application Steps

SUBSTRATE PREPARATION

Clean all surfaces. Joint walls must be sound, clean, dry, frost-free, and free of oil and grease. Curing compound residues and any other foreign matter must be thoroughly removed. A roughened surface will also enhance bond.

Priming

Priming is not usually necessary for anodized aluminum, steel, non-absorbent materials such as glass, ceramics, stoneware and tiles. Most substrates only require priming if testing indicates a need or where sealant will be subjected to water immersion after cure. Consult Technical Service at 1-800-933-SIKA for additional information on priming.


See More


Specifications

Coverage
Width/Depth1/4''3/8''1/2''
1/4''24.3
3/8''16.210.8
1/2''12.18.16.1
3/4''8.15.44.0
1''3.0
1.25''2.4
1.5''2.0
Curing Rate
Tack-free Time (TT-S-00230C)1 to 2 hours depending on climate
Final Cure3 to 5 days
Elastic Recovery
>90 %(73 °F (23 °C) and 50 % R.H.) (ASTM C-719)
Lap Shear Strength
165 psi

(73 °F (23 °C) and 50 % R.H.) (ASTM D-1002

modified, glass substrate)

Shore A Hardness
40-45(73 °F (23 °C) and 50 % R.H.) (ASTM D-2240)
Tensile Strength
225 psi(73 °F (23 °C) and 50 % R.H.) (ASTM D-412)