Flooring Primers & Moisture Barriers - Sika® Level-02 EZ Primer
Acrylic Primer for use with Sika® Level products on difficult substrates
Special acrylic primer for use on sound, smooth and non-porous substrates in interior areas. Applied prior to the use of Sika® Level products on epoxy, ceramic tiles, old vinyl, linoleum and rubber coverings.
- Provides optimum adhesion
- Ready-to-use, no dilution required
- Quick dry time
- Low VOC
- Solvent free
- Suitable for application on subfloor radiant system
- Low consumption of material
Usage
- Many tight substrates like- terrazzo, ceramic tiles, natural stone
- Old substrates with water-resistant adhesive residues
- Fully-bonded old elastic coverings
- Old sealed/coated substrates
- Epoxy moisture barrier
- Metal
- OSB board and Plywood
- Luxury Vinyl Tile (LVT) and Vinyl Composite Tile (VCT)
Advantages
- Provides optimum adhesion
- Ready-to-use, no dilution required
- Quick dry time
- Low VOC
- Solvent free
- Suitable for application on subfloor radiant system
- Low consumption of material
Packaging
1 gal. (3.8 L) pail
Color
Mint Liquid
Product Details
Product Information
Shelf Life12 months from date of production if stored properly in original, unopened and undamaged sealed packaging
Storage ConditionsStore dry at 41-95 °F (5-35 °C). If frozen, discard
Condition material to 65-85 °F (18-30 °C) before using.
Density81 lb./ft3 (1.2 kg/l)
Application
Application Information
Ambient Air Temperature50-95 °F (10-35 °C)
The stated application temperatures are to be achieved before priming and should be maintained for a period of at least 3 days after installation of the primer and underlayment.
Relative Air Humidity<75 %
Substrate Temperature50-95 °F (10-35 °C)
Cure Time30-60 minutes
Consumption
Coverage325-500 ft2 (30.2-46.4 m2) per unit
(Coverage figures do not include allowance for surface profile and porosity or material waste)
Application Steps
MIXING- Before applying, thoroughly shake the container in which the material is supplied to agitate the contents, ensure all solids are distributed throughout the dispersion and a uniform consistency is achieved.
APPLICATION- Apply Sika® Level-02 EZ Primer undiluted with a 1/4” nap roller, working the material into the prepared substrate.
- Typically, one single application is required.
- Ponding of the primer on the surface must be avoided and puddles must be removed.
- Where temperatures exceed 86 °F (30 °C), refer to and follow ACI hot weather application and protection guidelines.
- Should colder conditions prevail, make allowance for the use of indirect and vented heaters to achieve and maintain the application temperature required.
CLEANING OF TOOLS- Clean tools in water immediately.
See More
See Less