Safety Technology International, Inc.

STI – Protective Covers for Fire Alarm & Exit Devices

  • Devices to help stop false fire alarms
  • Wire guards to help stop vandalism and accidental damage of fire protection/security devices
  • Polycarbonate covers to help stop vandalism and accidental damage
  • Units to help stop theft

Warranty

All polycarbonate covers and 9-gauge steel wire products carry a 3 year warranty against breakage in normal use. Electro mechanical and electronic components carry a one year warranty.

TO HELP STOP FALSE FIRE ALARMS...


Safety Technology International, Inc.

Universal Stopper®

This dome shaped or low profile, indoor/outdoor polycarbonate cover protects devices such as dual action pull stations, keypads for entry systems, intercom stations, emergency buttons, electrical light switches, duplex plugs, etc., without restricting legitimate operation. The versatile cover offers excellent protection against physical damage (both accidental and intentional), dust and grime as well as severe environments inside and out (type rating pending). The cover, with or without horn, is available in dome or low profile, flush mount, surface mount or waterproof back box (pending) models. Maximum protrusion is 4 inches deep. Cover accommodates most dual action pull stations.


Safety Technology International, Inc.

Stopper® II Pull Station Protector

This unique and patented device has been helping stop false fire alarms around the world for more than 30 years, without restricting legitimate alarms. The Stopper II (STI-1100) protective cover offers excellent protection against physical damage (both accidental and intentional), dust and grime (with use of gasket kit). It consists of a clear, tamperproof, super tough polycarbonate shield and frame that fits over a manual pull station. The STI-1130 includes a spacer (as shown in photo). When lifted to gain access to the actual alarm, it sounds a piercing warning horn. Immediate attention is drawn to the area and the prankster will either run or be caught. Ideal for public buildings. UL/cUL Listed, FM Approved and ADA Compliant.

Stopper® II Heated Enclosure

This Stopper II enclosure with heater allows addressable dual monitor modules to be installed inside or outside in temperatures below UL Listing limits or in other NEMA 3R environments. UL/cUL Listing requires outdoor rated stations. The cover offers excellent protection against physical damage (both accidental and intentional), as well as other environments inside and outside. Also ideal for inside of walk-in freezers. UL/cUL Listed, ULC and ADA Compliant.


Safety Technology International, Inc.

Stopper® Stations

These ADA Compliant, multipurpose push button switches cover a wide range of applications both indoors and outdoors. They incorporate a unique, patented design that helps stop accidental activation. A number of standard models are available or custom units can be made to meet specific needs within days. The button housing is available in five universal colors (red, green, yellow, white or blue) to help identify switch usage, wording and language. Activation choices include: Push-to-Activate and Key-to-Reset, Push and Turn-to-Reset, Push and Key-to-Reset, Key-to-Activate, Momentary Mushroom, Momentary Touch, Illuminated Mushroom and a Pneumatic Adjustable Timer.


Safety Technology International, Inc.

Metal Protective Cabinets

These heavy-duty powder coated enclosures for electrical and electronic equipment (up to 1000V) provide personal protection from hazardous parts and provide a degree of protection to enclosed equipment. Various sizes are available. EM models are constructed for indoor use. All enclosures offer protection against vandalism either accidental or intentional. Enclosures mount to the wall enabling units to be protected in their designated location. They have a durable finish to help protect against corrosion. Model with air conditioning: STI-7560AC. Model with heat: STI-7560AH.


Safety Technology International, Inc.

Wire Guards

STI borrowed from nature's master builder, the spider, to create a web of protection from vandalism and accidental damage with these guards. These protectors consist of a tough, 9-gauge steel wire that is coated with corrosion resistant white polyester, which offers excellent protection against vandalism and damage. They are recommended for areas where abuse is severe or it is imperative important units continue to operate.


Safety Technology International, Inc.

Motion Detector Damage Stoppers®

These wire guards help protect PIR units. These super tough cages are extremely effective in reducing malfunctions and high maintenance costs where vandalism or accidental damage is prevalent. They are constructed of 9-gauge steel wire with corrosion-resistant polyester coating. Five sizes are available. Two sizes are designed to fit motion detectors for corner mount units and three are for wall mount applications.


Safety Technology International, Inc.

Beam Smoke Guard

These guards protect costly sensor units of beam type smoke detectors from damage leading to misalignment and false alarms. Five models are offered to protect the vital sensor units of projected beam type smoke detectors in large areas (such as gymnasiums, warehouses and auditoriums). STI Beam Smoke Damage Stoppers are designed to protect both transmitter and receiver sensors.


Safety Technology International, Inc.

Exit Sign Damage Stopper®

Wherever exit signs are at risk from either intentional or accidental damage, installation of our super tough wire guard is the solution to the problem. Two sizes available to cover a wide range of exit sign models available today. Installation is simple with anchors and screws provided.


Safety Technology International, Inc.

Emergency Light Damage Stopper®

Here is an excellent way to protect your emergency lights against both vandalism and accidental damage. It's easy to install with all screws and anchors provided. It is constructed of tough, 9-gauge steel wire that is coated with corrosion resistant polyester. It is not surprising it is backed by a lifetime guarantee against breakage in normal use. This Stopper is highly recommended for areas where abuse is severe or it is imperative that emergency lights continue to operate.


Safety Technology International, Inc.

Horn/Strobe Damage Stoppers®

These virtually indestructible covers (slotted for horn or speaker units and solid for strobe-only alarms) are designed to stop vandalism and accidental damage. Molded of clear, thick, UV-stabilized polycarbonate material, they are backed by a lifetime guarantee against breakage in normal use. Many tough, clear spacers are available for larger strobe/horn units, retrofits, surface mount and weather resistant applications.


Safety Technology International, Inc.

Polycarbonate Enclosure

Versatile protective covers help prevent theft and vandalism to larger keypads, access controls, fire control panels and similar devices. Covers increase the life and reliability of units by protecting them from accidental or intentional damage. Many sizes are available.Some models have optional gaskets to help keep out water in wet locations and wash down areas. Backed by a three year guarantee against breakage in normal use.


Safety Technology International, Inc.

Fire Extinguisher Theft Stopper®

If you are fed up with replacing your fire extinguishers, this sturdy, tamperproof, self-contained alarm is the answer. It has proven highly effective in helping stop theft, misuse or vandalism of fire extinguishers. Yet, it leaves the extinguisher accessible for emergencies and does not interfere with fire fighting in any way. The polycarbonate is backed by a lifetime guarantee against breakage in normal use (one year on electro mechanical and electronic components).


Safety Technology International, Inc.

Exit Stopper®

Here is a highly effective way to alert you to any unauthorized exits or entries through any emergency exit door. If the protected door is opened, the electronic Exit Stopper emits an ear piercing alarm for 30 seconds, 3 minutes or continuously (as preset by the user). Alarm has a choice of a loud 105dB or a softer 95dB. A key operated override will silence the alarm and allow authorized exits. It is available in red or green for almost any type of door, mounting or installation, including remote placement of the alarm. The polycarbonate is backed by a lifetime guarantee against breakage in normal use (one year on electro mechanical and electronic components).

Safety Technology International, Inc.
2306 Airport Rd.
Waterford, MI 48327
Tollfree: (800) 888-4784
Fax: (248) 673-1246
E-mail: info@sti-usa.com
Web site: http://www.sti-usa.com