Haws Corporation -Chilled Vandal-Resistant ADA Motion-Activated High Polished Fountain - H1001.8HPSHO

DOWNLOADS

Model H1001.8HPSHO, ADA wall mounted, vandal-resistant, touchless high-polished stainless steel electric fountain with 100% lead-free waterways. FOR INDOOR USE ONLY


Category: ADA-compliant drinking water dispensers | accessible products | dispensers...

MasterFormat: Plumbing Fixtures | Drinking Fountains and Water Coolers | Drinking Fountains...



Haws Corporation
1455 Kleppe Lane
Sparks, NV 89431
Tel: (888) 640-4297
Fax: (775) 359-7424

customerservice@hawsco.com

https://www.hawsco.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


Chilled Vandal-Resistant ADA Motion-Activated High Polished Fountain - H1001.8HPSHO

Chilled Vandal-Resistant ADA Motion-Activated High Polished Fountain

Model H1001.8HPSHO ADA vandal-resistant electric touchless drinking fountain provides 8 gph (30.3 L) chilled water performance in an engineered high-polished stainless-steel skin. This wall mounted swirl bowl designed fountain incorporates a touchless sensor operated stainless steel solenoid valve controlled by a transformer for hands-free operation. A pressure regulator is used to adjust the bubbler flow according to incoming water pressures.

  • Touchless operation for safety and peace of mind
  • Vandal resistant components include the bubbler, bowl, drain and bottom plate
  • 30-second obstruction time-out to reduce tampering of sensor
  • 18 gauge Type 304 polished stainless steel bowl assembly mounted on a 14 gauge Type 304 polished stainless steel wall bracket
  • 100% lead-free waterways
  • Grille slots are designed to eliminate sharp edges and are backed with a foam filter to protect the fan motor and high displacement compressor from debris
  • Polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow eliminate water splash
  • Beautiful satin finish resists stains and corrosion
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, faucets and electric water coolers to be lead-free by all known definitions including NSF/ANSI/CAN 61- Section 9, NSF/ANSI/CAN 372, California Proposition 65, and the Federal Safe Drinking Water Act. Product is compliant to California Health and Safety Code 116875 (AB 1953-2006), and NSF/ANSI/CAN 61: Q ≤ 1. Note: Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.

Prop 65 Warning. For California Residents Warning: This product contains a chemical known to the State of California to cause cancer and/or birth defects or other reproductive harm.

Certifications
  • CSA Certified
  • ADA Compliant
  • NSF/ANSI/CAN 61-2020 with Q ≤ 1
Specifications

Model H1001.8HPSHO vandal-resistant electric ADA wall mounted motion-activated drinking fountain shall include an 18 gauge Type 304 polished stainless steel basin with integral swirl design, 14 gauge Type 304 polished stainless steel wall bracket, 100% lead-free waterways, sensor operated stainless steel solenoid valve with 30-second obstruction time-out controlled by a transformer, polished chrome-plated brass vandal-resistant bubbler head with integral laminar anti-squirt flow, chrome-plated brass vandal-resistant waste strainer, vandal-resistant bottom plate, polished stainless steel back panel and louvered intrusion-proof grill, and 1-1/4" O.D. (3.2 cm) waste pipe. The R-134a refrigeration system is hermetically sealed and delivers a minimum of 8 gph (30.3 L) of water at 50° F (10° C) cooled from 80° F (26.7° C) inlet water at 90° F (32.2° C) ambient. 115 Volts, 60Hz, rated watts: 370, full load amps: 5 ........................................................................................... REQUIRES MODEL HCR8 AND MTGFR.SM PRICED SEPARATELY.


See More