DoorKing, Inc. -1620 Lane Barrier

DOWNLOADS

The DKS Lane Barrier Accessory System is designed to be used with the 1603-580 Operator.


Category: barricades | barrier gates | security barricades...

MasterFormat: Roadway Construction | Vehicle Barriers



DoorKing, Inc.
120 S. Glasgow Avenue
Inglewood, CA 90301
Tel: (800) 826-7493
Fax: (310) 641-1586

info@doorking.com

https://www.doorking.com/

Find a rep/distributor

Request More Info

DOWNLOADS

Related Products

Overview


1620 Lane Barrier

Help Prevent Passenger Vehicles and Light-Duty Trucks From Driving Through a Controlled Traffic Lane with a Surface Mount System*

The DKS Lane Barrier Accessory System is designed to be used with the 1603-580 Operator. The Lane Barrier is ideal in applications where a higher degree of vehicle traffic control is desired, but without the expense of bollards, wedges, or crash beams - making it ideal for apartment communities, gated condominiums, car rental agencies, parking lots, and toll booths.

* This Lane Barrier System is not crash-rated. It is intended to provide a formidable barrier to help prevent passenger vehicles and light-duty trucks from driving through a controlled traffic lane.

CAUTION: not to be used in areas subject to freezing weather with the potential for snow and ice accumulation.

Installs Where It’s Needed

Surface mount design means it installs for thousands of dollars less than crash rated systems.

Add-on Accessory

The lane barrier must be used with the 1603-580 operator (sold separately).

Lighted Top Arm

Increases visibility and safety for improved wayfinding.

Heavy Duty

Reinforced steel helps prevent vehicle barrier runners.

Internal 4-Ply Nylon Strap

Provides 22,000 lb capacity.

Steel Barrier Arm

Rotates into surface mount speed bump for easy vehicle entrance.

Specifications

1620 Lane Barrier is not a stand-alone system. It must be used with the 1603-580 Operator (sold separetly)

  • Speed bump U-channel is 1/4 In (6.35mm) A36 steel
  • Speed bump top plates are 1/4 In (6.35mm) 4-way multigrip steel plate
  • Speed bump assembly is zinc plated and finished in powder-coat 90% gloss
  • Anchor post assembly are surface mounted 8 In (203.2mm) x 8 In (203.2mm) x 1/4 In (6.35mm), 48 In (1219mm) high (+cap)
  • Anchor base plates are 12 In (304.8mm) x 42 In (1067mm) x 1/2 In (12.7mm) with eight (8) anchor points
  • Anchor post assemblies is zinc plated and finished in powder-coat full gloss super polyester

Mechanical

1620 Lane Barrier

  • Steel barrier arm and heavy-duty post
  • Surface mount (concrete only) - installs for thousands of dollars less than crash rated systems
  • Fast speed - raises and lowers in approximately 2.5 seconds
  • Simple mechanical linkage to DKS 1603-580 Operator keeps Barrier Arm and Lane Barrier in sync - no separate motors or hydraulic valves to worry about
  • Available for lane widths of 9 Ft (2.74m), 10 Ft (3.0m), 12 Ft (3.66m) and 14 Ft (4.27 m)
  • Best use is with passenger vehicles and light-duty trucks only


See More


Specifications

Dimensions and Weight

1620 Shipping weight approximately 1500 - 1700 Lbs (680 - 771 kg)

Depth Dimensions